|Application:||Industrial Usage, Water Industrial Usage, Household Usage||Structure:||Floating Ball Valve|
|Body:||4A(2205), 5A(2507), C5, C12A, Wc6, Wc9,Inconel 625||Seat:||4A(2205), 5A(2507), C5, C12A, Wc6, Wc9,Inconel 625|
DN15 Soft Seated Ball Valve,
Forged Soft Seated Ball Valve,
4A2205 Body Soft Seated Ball Valve
3PC Forged Stainless Steel Size Ball Valve Flanged
STAINLESS STEEL BALL VALVE SPECIFICATIONS AND FEATURES
Our 2 piece and 3 piece Stainless Ball Valves can be used in place of Discover Valve, Jomar Valve , Nibco Valves , Direct Material Ball Valves, Duda Diesel Ball valves, Apollo valves, and the ones found in any hardware store like Grainger.
TECHNICAL INFORMATION AND SPECIFICATIONS OF 2 PIECE BALL VALVE AND A 3 PIECE BALL VALVE
Valves are sized according to the size of the pipe or thread that they conform to. So a threaded ball valve with 2" threads will be classified as a 2" Valve and so on.
HOW A BALL VALVE WORKS:
A ball valve can be considered a quarter turn ball valve which makes use of a bored ball that pivots in a seat to control flow. This hollow ball has been bored to a particular sized pipe's ID, running straight through it. When this hollow bore is lined up with the pipe, then It is open and flow is permitted. When this hollow bore is turned 90 degrees by the handle, it is closed and flow stops. When the valve handle is in line with the pipe, the flow is open, and when the handle is at 90 degrees to the pipe, then the flow is closed. Stainless Steel valves are reliable since they can be used repeatedly opening and closing flow many times, with no effect on performance. Even after extensive periods of not being used they close securely.
WORKING PRESSURE (PSI)
Rated at 1000 psi PN63, these SS Ball Valves are perfect for everyday use in almost all industries. They work well in conjunction with Camlock fittings and Couplings.
1000 WOG (WATER, OIL, GAS)
WOG stands for water, oil and gas. These Stainless Ball valves are suitable for all material compatible with stainless Steel and PTFE which covers a wide range. Including among others water, oils, gas (air), alcohol, fuels, and light acids and alkali’s.
The main Seat seal is Teflon (PTFE) making the SS Ball Valve Chemical and heat resistant. All the 3 seals near the handle are also PTEF including the Stem Packing Seal, the Stem Seal and the body seal.
Our stainless steel threaded ball valve is manufactured with Female NPT Threads on either end. As with all NPT threads they are designed to seal when threaded to a pipe. Other ends are available on request, such as Male NPT Threads or stainless steel flanged ball valves.
FULL PORT VALVE
In Full port ball valves the pipe diameter is kept constant throughout the length of the valve, where the ID of the bore is equal to the ID of the Pipe. This means that there is no flow restriction resulting in a constant flow rate. Also referred to as full bore valves ,the major benefits are the reduction of cavitation and pressure drop.
Stainless Steel Ball Valves are investment cast and the casting is approved AD2000-WO. All Wetted Parts of the Ball Valve is Stainless Steel 316. Investment casting results in a durable product that can funtion repeateldy even after years of no use.
All valve handles are 304 Stainless Steel with a plastic cover. The stem handle has an Anti-Blow-out Design. When the handle is aligned with the valve, then Flow is open and when the handle is perpendicular, flow is closed.
HANDLE LOCKING DEVICE
The lock that enables the valve handle to be locked in place once closed is manufactured from SS304 and supplied standard with every Valve. Care has to be taken to lift this locking device up before opening the handle or else it will not move.
APPROVALS AND INSPECTION TESTS
PED97/23/EC (CE0035 approved) AP1598; EN12266 inspection tests. The Treads have the following Approvals ASME B1.20.1 BS21 DIN299/259; ISO228-1; JIS B0203; ISO7/1.